Our Full Mold Remediation Process
5 Steps For A Healthier Home
Our Full Mold Remediation Process
5 Steps To A Healthier Home
The Consultation & Visual Inspection
Things that you will achieve during our free consultation:
- visual assessment with moisture meter.
- discuss potential causes mold and water damage issues throughout home
- educate on how complex mold issues can be, both relating to your health and indoor environments.
- We provide a rough estimate based on the initial scope of work
- discuss next steps for safe, effective remediation and removal
Testing & Thorough Inspection
Thorough inspection and testing is important when health symptoms are present or the source of mold is not visibly apparent. We use advanced tools and techniques to go beyond a basic visual assessment, identifying hidden mold and moisture issues.
- Non-Invasive Technical Tools: Moisture & Humidity readings, Video scoping, Infrared scanning, Infrared Thermal Imaging
- Minimally Invasive Demo – Strategic removal of small sections of drywall or materials to visually confirm mold growth.
- Air & Surface Mold Testing – Laboratory testing of air or surface samples to measure mold spore levels and species present.
Mold & Water Damage Remediation
Once any and all moisture sources causing mold are identified then we address each cause individually, removing saturated materials and fixing the cause and drying is your next step. Examples of water damage causing mold in homes:.
- Saturation – Caused by flooding, slow pipe leaks, burst pipes, or exterior water intrusion from poor drainage, faulty windows, damaged siding, or roof issues.
- Humidity – Results from poor ventilation in attics or bathrooms, improperly ducted fans, inadequate wall or ceiling insulation, lack of airflow, missing vapor barriers, or poor crawl space air and moisture control.
Removal & Cleaning
After complete remediation
- Good – Can include basic cleaning plus using our 2-part, non-toxic dry fog system to quickly reduce airborne mold spores and apply a microscopic protective layer to all surfaces.
- Better – Includes deep cleaning of HVAC and ductwork, plus our 2-part, non-toxic dry fog system to rapidly reduce airborne mold spores and apply a microscopic protective layer on all surfaces.
- Best – Ideal for mold-sensitive individuals or those with compromised immunity. Includes full HEPA Cleanse: antimicrobial wipe-down of all surfaces, HEPA vacuuming, air scrubbing, and our 2-part, non-toxic dry fog system to reduce mold spores and apply a protective layer.
Maintain a healthy home.
Protect your investment by staying proactive. Pure Maintenance is committed to long-term home health and offers these key maintenance guidelines:
- Use of air purifiers, quality HVAC filters, regular house cleaning & change filters often to keep your home clean & dust levels low.
- Re-inspection of your homes exterior, attic, crawl space and areas with plumbing seasonally.
- Keep humidity low and air moving to discourage mold growth.
- Periodic treatments using our Dry fog as needed to maintain low mold levels.
- Reach out anytime for continued support and expert guidance for mold-related questions.
Mold Removal Portland Oregon
The many Mold remediation Services we offer:
Our mold removal process provides mold removal for any part of your home or office. Pure Maintenance provides mold removal for homes and businesses in Portland Oregon. We use the Pure Maintenance patented dry fog modern technology that allows us to eliminate toxic mold from essentially any building.
- Water Damage Restoration Service
- Mold Remediation
- Attic Mold Removal
- Patented Dry Fogging Technology
- HVAC/Ductwork Mold Removal
- Crawl Space Mold Removal
- Crawl Space Clean Out
- Crawl Space Encapsulation
- Hepa Cleanse (Microbial Cleaning)
- Negative Air Pressure & Containment
- Stachybotrys Chartarum Mold Removal
- Chaetomium Mold Removal
- Waterproofing Service
- Indoor Environmental Services
- Antimicrobial Cleaning Services
- Black Mold Removal
- Bathroom Mold Removal
- Basement Mold Removal
- Crawl Space Encapsulation
- Crawl Space Vapor Barrier
- Demolition-Free Process
- Insulation Replacement
- Mold Testing
- ERMI, EMMA & Spore Trap Testing
- Mold Inspection
- Emergency Water Response
- Dry Wall Removal
- Toxic Mold Removal
- Air Duct Cleaning Service
- Building Restoration Service
- Property Maintenance
21,000,000 +
Asthma Cases Due To Mold Exposure
45,000,000+
Buildings Since 2017 Have Unhealthy Levels Of Mold
Play video
How we did that
Mold Removal Portland Oregon
The many Mold remediation Services we offer:
Our mold removal process provides guaranteed mold removal for any part of your home or office. Pure Maintenance provides mold removal for homes and businesses in Portland Oregon. We use the Pure Maintenance patented dry fog modern technology that allows us to eliminate toxic mold from essentially any building.
- Water Damage Restoration Service
- Attic Mold Removal
- Patented Dry Fogging Technology
- HVAC/Ductwork Mold Removal
- Crawl Space Mold Removal
- Crawl Space Encapsulation
- Hepa Cleanse (Microbial Cleaning)
- Negative Air Pressure & Containment
- Stachybotrys Chartarum Mold Removal
- Chaetomium Mold Removal
- Waterproofing Service
- Environmental Consultant
- Cleaning Service
- Black Mold Removal
- Bathroom Mold Removal
- Basement Mold Removal
- Demolition-Free Process
- Mold Testing
- ERMI, EMMA & Spore Trap Testing
- Mold Inspection
- Emergency Water Response
- Dry Wall Removal
- Toxic Mold Removal
- Air Duct Cleaning Service
- Building Restoration Service
- Property Maintenance
21,000,000 +
Asthma Cases Due To Mold Exposure
45,000,000+
Buildings Since 2017 Have Unhealthy Levels Of Mold
Play video
How we work
Our Priority!
What Makes Us Stand Out?
Mold Testing & Inspections
Our process goes beyond a surface level look. We deliver a complete diagnostic investigation that uncovers what others often miss. Here's how we do it:
Mold Removal & Fogging
Our dry fog technology reaches every corner of your home, eliminating mold at the source. This non-toxic system is faster, safer, and more effective than traditional methods.
Water Damage Restoration & Repair
Partnering with Rescom Restoration, we offer complete, water damage recovery —combining rapid response & expert repairs to restore your home to pre-damage condition.
✅ What Sets Us Apart
✅ What Sets Us Apart
🔍 Our 4-Step Mold Inspection Process
🔍 Our 4-Step Mold Inspection Process
Visual Assessment – We inspect visible signs of mold, water stains, damage, and suspect areas.
Moisture Mapping – Using digital meters, we trace moisture intrusion points in walls, ceilings, and floors.
Air & Surface Testing (when needed) – We take samples for lab analysis to confirm mold presence and types.
Detailed Findings & Recommendations – You receive a clear explanation of what we found and what steps to take next.
✅ What Sets Us Apart
✅ What Sets Us Apart
🔍 Our 4-Step Mold Removal Process
🔍 Our 4-Step Mold Removal Process
1 – Using containment and negative air pressure, we remove any building materials severely saturated or whose structural integrity has been compromised.
2 – Keeping containment and negative air in place, we set up drying equipment like fans and dehumidifiers to thoroughly dry any building materials still showing moisture.
3 – After all remaining structural materials are dry, we use a HEPA vac for horizontal surfaces, then wipe down and clean all surface areas using an antimicrobial.
4 – After all surfaces are wiped down and thoroughly cleaned, we apply our patented dry-fog sterilization process-a two-part treatment that kills and sterilizes any remaining mold spores and applies a long-term preventative, making all surfaces inhospitable to mold growth.
This process is complete top tier remediation. It ensures safe, effective mold elimination with containment, thorough drying, antimicrobial cleaning, and advanced sterilization and an encapsulating coating for long term prevention.
✅ What Sets Us Apart
✅ What Sets Us Apart
🔍 Our 4-Step Water Damage Repair Process
🔍 Our 4-Step Water Damage Repair Process
1 – We assess all repairs needed, quantify replacement costs, and communicate with homeowners about upgrades they’d like to consider.
2 – During the rebuild planning, we identify all causes of moisture or mold and replace or alter to improve the environment to prevent future moisture and mold problems.
3 – We manage and complete the rebuild using in-house staff and trusted subcontractors for specialist work.
4 – Once finished, we check in yearly to confirm low mold and moisture levels and that all remediation work is holding up and no new issues are arising.
Our main focus as mold remediation specialists is identifying all causes and damage of moisture, removing and remediating mold, sterilizing your environment before rebuilding. We offer repair and restore service as a benefit to our clients however we offer free consulting and are happy to refer trusted General contractors or work with your GC to create a low-mold, low-moisture space.
Our Priority!
What Makes Us Stand Out?
Mold Testing & Inspections
Our process goes beyond a surface level look. We deliver a complete diagnostic investigation that uncovers what others often miss. Here's how we do it:
Mold Removal & Fogging
Our dry fog technology reaches every corner of your home, eliminating mold at the source. This non-toxic system is faster, safer, and more effective than traditional methods.
Water Damage Restoration & Repair
Partnering with Rescom Restoration, we offer complete, water damage recovery —combining rapid response & expert repairs to restore your home to pre-damage condition.
✅ What Sets Us Apart
✅ What Sets Us Apart
🔍 Our 4-Step Mold Inspection Process
🔍 Our 4-Step Mold Inspection Process
Visual Assessment – We inspect visible signs of mold, water stains, damage, and suspect areas.
Moisture Mapping – Using digital meters, we trace moisture intrusion points in walls, ceilings, and floors.
Air & Surface Testing (when needed) – We take samples for lab analysis to confirm mold presence and types.
Detailed Findings & Recommendations – You receive a clear explanation of what we found and what steps to take next.
✅ What Sets Us Apart
✅ What Sets Us Apart
🔍 Our 4-Step Mold Removal Process
🔍 Our 4-Step Mold Removal Process
✅ What Sets Us Apart
✅ What Sets Us Apart
🔍 Our 4-Step Water Damage Repair Process
🔍 Our 4-Step Water Damage Repair Process
Don’t hesitate and lets get started! Contact us for a free consultation on your next home or business Mold Removal Portland and remediation project. (503) 461-1006
Getting Your Home Back – Mold Inspection Options
A mold inspection usually takes numerous steps to finish. Mold is usually discovered in damper areas of the home, such as the basement, crawl space or bathroom, but it can even be discovered where there is constant wetness. Usually, unsuitable drain, leak or high humidity triggers mold infestations. If you start to smell a moldy smell, or you otherwise believe you have a mold infestation, getting a mold inspection done may be your first line of defense to guarantee both the safety of your household but also that more damage is not done to the home. A mold inspection will determine exactly where the mold is, what sort of mold it is, and even the causes and prospective options to the problem.
Usually, a homeowner has a couple of choices when it concerns mold inspection and tests. There are a number of tester kits out there that you can look for at either home remodeling stores or on the internet. However, these do not usually supply the sort of report that you may be needing when confronted with a mold problem. There will be numerous concerns that you have, which can usually only be addressed by someone expertly trained to handle mold and mold related issues. Getting an inspection done by a expert will not just guarantee you that the tests are done correctly, but even, provide you the remedies you need to be able to have a comprehensive inspection and even find out what your solutions may be.
You can even have a mold inspection incorporated in a routine home inspection. Make certain though that the individual doing the inspection is accredited to do those sort of inspections due to the fact that not all home inspectors are, and this is information you will need to verify yourself. If you just want a mold inspection done, it is usually best to choose someone who is accredited and highly knowledgeable in the field.
Understand that mold does require wetness to cultivate and to grow. Throughout the inspection you will find that the inspector examines not just the problem areas that would promote mold growth but will even inspect the foundation for leakage, any drain issues, air quality and humidity levels. This will be contributed to samples of visible mold, and the inspector will have the various tools required to search for and examine mold that may be hiding itself in duct work and behind walls.
Once the inspection has actually been done, the inspector will share with you the final results and talk about the report with you. Any concerns you may have, you need to ask at this time. Inspectors will usually help you to recognize the causes of the mold in your home and how it is best to go about eliminating the mold itself, but even repairing the causes. The written report will advise you all of the approaches that have actually been utilized in the place of the mold, figuring out the cause, and what suggestions they may have for you in handling it.
Mold and air quality screening is necessary to those buying brand-new homes. Even for owners of old homes it is important to identify these things due to the fact that they might result in health issues for occupants.
Mold Testing Solutions – When To Employ One?
Mold testing is essential because each individual’s reaction to different strains of mold depend on both the individual and the span of time that they are subjected. Oftentimes, mold is harmless and does not harm your health or your house. However, some types of mold can be harmful or extremely hazardous when they take place in your house. Mold can cause allergies in some people with symptoms varying from skin inflammation, trouble breathing and mental state swings. Some people are more prone than others; those who are most at risk from precariously hazardous mold are the very young, the very old and people with weakened body immune systems.
House owners ought to not delay with mold testing because, if mold takes hold in your house and triggers damage, you may find that your house loses some of the value that you have been striving to create. Of the over 100,000 types of mold, a significant percentage have been determined as extremely hazardous to human beings. In addition, depending on the degree of your issue, mold removal can be quite pricey and, regrettably, not all insurance coverage strategies will cover the expense of the removal of mold. The expenses also depend on whether the mold assaults the substructure of your house including the walls, floorings, ceilings and roof. Clearly, if you have to take down wallpaper and drywall or replace your hardwood floor covering, you’re going to have a more costly job than if you simply need to replace your drenched carpet. To maintain the value of your house, have your house evaluated for mold and take appropriate actions. This will also help to maintain the health and wellness of both your family and yourself. For these main reasons and more, it is always in your best interests to retain a mold testing provider if you believe you have a mold issue. If you are thinking about selling your house, this is particularly crucial since if a prospective purchaser discovers mold during the escrow mandated evaluations, mold remediation can delay or nullify the sale.
Mold testing experts have been trained to inspect and test the air and the structure of your house to see if mold exists. If the mold testing professional discovers that mold is, in fact, present in your house, his next job is to figure out exactly what kind of mold it is and at what concentration it exists in your environment. Next, the professional should figure out the mold’s exact location and probable source. Your house can only be validated as without mold if all mold is eradicated and because mold is generally brought on by excessive wetness, the source of this wetness must be discovered. Whether the source is as easy as a high level of humidity in the house in general or as complex as an unseen leakage that is enabling excessive wetness to enter your house, locating the source of the wetness is the secret to keeping your house mold free in the future.
After your mold testing is done, a trustworthy mold removal business will offer a number of options for how to proceed if they find that you have mold. To develop a remediation plan for your house, the mold professional should have enough information to figure out both the kind of mold you are struggling with as well as the scale of its concentration. The kind of mold will identify what procedures will need to be followed for treating it and the concentration will figure out precaution and the timeframe for complete remediation. Also, depending on the size of the issue, a small section of the floor covering or wall-board can be cut and dealt with while a bigger area might require specific equipment or a more detailed procedure to prevent further contamination.
Mold can be a toxic and unwelcome guest in your house. For this reason alone, it is recommended to get in touch with a mold testing specialty company as soon as you can as soon as you believe mold has infested your house. Not only will a specialist test your house for the presence of mold, they can encourage you on the procedures you ought to take to remove it if it is found.found.
Professional Mold Removal
Mold can be a scary thing, but luckily, it’s not something that is difficult to manage or get rid of. Professionals know that mold must have 2 things to thrive and prosper: wetness and humidity. A mold removal professional can visit your home to recognize locations where mold is growing or has actually formerly grown.
Such professionals can then thoroughly seal your home so that it is totally waterproofed and secured from future mold growth. If needed and applicable, the mold removal professional may also wish to install a crawl space vapor barrier system to safeguard both your home and your health.
If you suspect mold growth in your basement or other areas of your home, contact a mold removal professional as soon as possible. Keep in mind: a musty-smelling home is an hazardous home. Take the needed steps to safeguard your household and your property by purchasing mold removal services today!
Mold removal is necessary to keeping a home and individuals in it safe, healthy, and comfortable. Mold, mildew, rot, and dust mites can trigger serious health problems, including asthma, allergies, eye and respiratory problems, and much more. Mold can also decrease a home’s property worth and result in pricey structural damage. Continue reading to read more about rot and how to manage, get rid of, and avoid mold growth in your home.
Mold Can Be Tricky and Common
Mold impacts indoor air quality, and, regrettably, can grow extremely quickly. In fact, mold can start to grow in a home with humidity over 60% in under two days. Mold can even grow and prosper in cold areas, such as a fridge, as long as the temperature is above 40-degrees Fahrenheit. “Hidden” rot can also privately grow in fiberglass insulation, and behind wallpaper and drywall. Although you may not be able to visibly see the rot, it doesn’t indicate that it’s not there and triggering damage to your home and your health.
Severe Impacts of Mold Development
The presence of mold in a home has numerous unfavorable effects. People can be exposed to rot through direct skin contact, breathing, or consumption. Mold exposure can trigger a number of health-related problems, including breathing difficulties, asthma and topical skin rash. Black mold is rare but highly-toxic and consists of carcinogenic mycotoxins that are linked to particular kinds of cancer, liver and nerve system damage, and more.
Mold can also trigger structural damage and damage the value of your home– nobody wishes to buy or move into a home with a serious mold issue!
Mold growth can also seriously impact your wallet for 2 factors: 1) if left in-tact, mold will continue to grow and become progressively pricey to get rid of; and 2) due to a increasing number of rot-related lawsuits, numerous home insurers now leave out mold insurance from homeowner policies.
Mold Avoidance
A simple yet efficient method to prevent mold growth is to purchase an energy-efficient dehumidifier. Due to the fact that mold likes dark, moist, humid areas, it naturally prospers in basements and crawl spaces. Buying a dehumidifier can considerably reduce your home’s humidity levels, making it difficult for mold to grow or thrive.
Our Latest Specials
Any Dry Fogging Treatment!
We value our customers and our community, we understand that water damage and mold issues can come out of nowhere and get very expensive very fast. We offer additional discounts for booking within 48 hours of your estimate, paying with cash/check vs. Visa, seniors, civil servants, our military and their families. Remember, we provide a full remediation process that is not available anywhere else and include these special discounts to help make your home more safe and feel confident that your mold issue has been resolved! Maximum discount per household or business cannot exceed $1000. Not valid if combined with other discounts. Offer only valid if presented during inspection.
Our Latest Specials
Any Dry Fogging Treatment!
We value our customers and our community, we understand that water damage and mold issues can come out of nowhere and get very expensive very fast. We offer additional discounts for booking within 48 hours of your estimate, paying with cash/check vs. Visa, seniors, civil servants, our military and their families. Remember, we provide a full remediation process that is not available anywhere else and include these special discounts to help make your home more safe and feel confident that your mold issue has been resolved! Maximum discount per household or business cannot exceed $1000. Not valid if combined with other discounts. Offer only valid if presented during inspection.
we are certified Mold Removal Portland Oregon SPECIALISTS
Why Choose Certified Mold Removal Service?
Estimates
We offer itemized "good", "better" and "best" options based on budget and level of motivation of our clients. This approach gives them entry level access to top tier mold remediation options, that get you the most bang for your buck.
Trusted
We have years of experience coupled with hundreds of satisfied and happy customers, giving us a 5 star rating while retaining customers and their referrals for life. This assures we'll be around when you need us offering additional free consulting and long term preventative maintenance advice.
Guarantees
We offer very transparent guarantees and continued lifetime discounts for future services which stay with the home. This offers extreme savings for any and all future water damage, mold inspection, mold testing, mold removal or mold remediation needs.
we are certified Mold Removal Portland Oregon SPECIALISTS
Why Choose Certified Mold Removal Service?
Estimates
We offer itemized "good", "better" and "best" options based on budget and level of motivation of our clients. This approach gives them entry level access to top tier mold remediation options, that get you the most bang for your buck.
Trusted
We have years of experience coupled with hundreds of satisfied and happy customers, giving us a 5 star rating while retaining customers and their referrals for life. This assures we'll be around when you need us offering additional free consulting and long term preventative maintenance advice.
Guarantees
We offer very transparent guarantees and continued lifetime discounts for future services which stay with the home. This offers extreme savings for any and all future water damage, mold inspection, mold testing, mold removal or mold remediation needs.
Years Of Experience!
0
+
We Break Down Mold Not Walls!
Removing mold from inside walls usually means tearing down entire walls—an expensive and invasive process. If your mold issue is from a previous water intrusion, and everything is currently dry, we offer you the ability to sterilize inside the wall bay without tearing out all the sheetrock. With our proven method of dry fog mold removal, you get 100% sterilization anywhere our dry fog can reach destroying mold spores at a fraction of the cost compared to other mold removal procedures. In many cases, there will be absolutely zero need for any demolition within the building. Our process leaves you with mold-free air, removes mold spores on contact and puts an end to the spread of mold in your home or office. We offer free re-inspections as well.
Years Of Experience!
0
+
We Break Down Mold Not Walls!
Removing mold from inside walls usually means tearing down entire walls—an expensive and invasive process. If your mold issue is from a previous water intrusion, and everything is currently dry, we offer you the ability to sterilize inside the wall bay without tearing out all the sheetrock. With our proven method of dry fog mold removal, you get 100% sterilization anywhere our dry fog can reach destroying mold spores at a fraction of the cost compared to other mold removal procedures. In many cases, there will be absolutely zero need for any demolition within the building. Our process leaves you with mold-free air, removes mold spores on contact and puts an end to the spread of mold in your home or office. We offer free re-inspections as well.
100% Non-Toxic Procedure
Demolition Free In Many Cases
24 Hour Rapid Response Time
Pure Maintenance is one of the the most respected and knowledgeable mold removal companies in the local Portland and surrounding areas.
We look to provide a full remediation vs just offering a band aid or quick fix.
Consulting & Inspections
Mold Removal
Mold Remediation
Mold Testing
Water Damage
Emergency Water Services
Emergency Water Services
Duct Cleaning
Blown In Insulation
Blown In Insulation
Ventilation Improvements
Crawl Space Encapsulation
Crawl Space Encapsulation
Bath Fan / Ducting Replacement
Basement Moisture Management
Crawl Space Moisture Management
Consulting & Inspections
Mold Removal
Mold Remediation
Mold Testing
Water Damage
Emergency Water Services
Emergency Water Services
Duct Cleaning
Blown In Insulation
Blown In Insulation
Ventilation Improvements
Crawl Space Encapsulation
Crawl Space Encapsulation
Bath Fan / Ducting Replacement
Basement Moisture Management
Crawl Space Moisture Management
What Our Clients Say!
Leading The Way In Mold Removal & Remediation!
“Pure Maintenance was more than mold removal, they understood the need for improving the attic ventilation and provided services above and beyond mold treatment. Jason explained the life cycle of mold and mold spores and his fog treatment is the best!” – Marty F, Vancouver
Easy-to-Understand
What Package Is Right For Me?
Good
This budget friendly package is what we consider to be entry level mold remediation. Our patented 2 part non-toxic, all organic dry fogging system will provide the quickest and most effective reduction of mold spores in your environment.
What's included?
- Free Consultation with Visual Inspection
- Inspect Environment To Confirm There Are No Active Water Issues & Building Materials Are Dry.
- Sterilize The Indoor Environment With Our Patented 2 Part Dry Fogging System.
- Completed In One Day
Better
Most homes have multiple contributors to moisture that can allow mold to grow. A better course of action beyond sterilizing the mold spores, is to fix any and all areas of concern that are putting moisture in the environment. Then remove saturated degraded materials and dry out any affected lumber.
What's included?
- Free Consultation with Visual Inspection
- Inspect Environment To Confirm There Are No Active Water Issues & Building Materials Are Dry.
- Remediation Phase 1: This fixes any and all areas of concern that are putting moisture in the environment.
- Remediation Phase 2: Remove saturated degraded materials and dry out any affected lumber.
- Sterilize The Indoor Environment With Our Patented 2 Part Dry Fogging System.
- Sometimes Completed In One Day
Best
For anyone that is mold sensitive or suffering from mold exposure, top tier remediation may be necessary. This involves deep through inspection everywhere, remediation of all areas of concern, deep cleaning and removal of any affected materials. Then, a very thorough anti-microbial, cleaning and wipe down of all the surfaces of the home, prior to sterilizing the indoor environment with our patented 2 part dry fogging system.
What's included?
- Free Consultation with Visual Inspection
- Inspect Environment To Confirm There Are No Active Water Issues & Building Materials Are Dry.
- Remediation Phase 1: This fixes any and all areas of concern that are putting moisture in the environment.
- Remediation Phase 2: Remove saturated degraded materials and dry out any affected lumber.
- Remediation Phase 3: A thorough anti-microbial, cleaning and wipe down of all the surfaces of the home, prior to sterilizing the indoor environment.
- Sterilize The Indoor Environment With Our Patented 2 Part Dry Fogging System.
For Exclusive Pricing Contact Us
Easy-to-Understand
What Package Is Right For Me?
Good
This budget friendly package is what we consider to be entry level mold remediation. Our patented 2 part non-toxic, all organic dry fogging system will provide the quickest and most effective reduction of mold spores in your environment.
What's included?
- Free Consultation with Visual Inspection
- Inspect Environment To Confirm There Are No Active Water Issues & Building Materials Are Dry.
- Sterilize The Indoor Environment With Our Patented 2 Part Dry Fogging System.
- Completed In One Day
Better
Most homes have multiple contributors to moisture that can allow mold to grow. A better course of action beyond sterilizing the mold spores, is to fix any and all areas of concern that are putting moisture in the environment. Then remove saturated degraded materials and dry out any affected lumber.
What's included?
- Free Consultation with Visual Inspection
- Inspect Environment To Confirm There Are No Active Water Issues & Building Materials Are Dry.
- Remediation Phase 1: This fixes any and all areas of concern that are putting moisture in the environment.
- Remediation Phase 2: Remove saturated degraded materials and dry out any affected lumber.
- Sterilize The Indoor Environment With Our Patented 2 Part Dry Fogging System.
- Sometimes Completed In One Day
Best
For anyone that is mold sensitive or suffering from mold exposure, top tier remediation may be necessary. This involves deep through inspection everywhere, remediation of all areas of concern, deep cleaning and removal of any affected materials. Then, a very thorough anti-microbial, cleaning and wipe down of all the surfaces of the home, prior to sterilizing the indoor environment with our patented 2 part dry fogging system.
What's included?
- Free Consultation with Visual Inspection
- Inspect Environment To Confirm There Are No Active Water Issues & Building Materials Are Dry.
- Remediation Phase 1: This fixes any and all areas of concern that are putting moisture in the environment.
- Remediation Phase 2: Remove saturated degraded materials and dry out any affected lumber.
- Remediation Phase 3: A thorough anti-microbial, cleaning and wipe down of all the surfaces of the home, prior to sterilizing the indoor environment.
- Sterilize The Indoor Environment With Our Patented 2 Part Dry Fogging System.
For Exclusive Pricing Contact Us
Trending Blog
